WIND

42 cm x 29.7 cm (Non-Bleed)
42.6 cm x 30.3 cm (Bleed)
3
1600
1400
1200
1000
800
600
400
200
4 5 6 7 8 9 10 11 12 13 14 15 16 17
Wind Speed (m/s)
S82-1.5 MW
Power curve
Power (kW)
18 19 20
MODEL S82-1500kW
OPERATING DATA
Rated power 1500 kW
Cut-in wind speed 4 m/s
Rated wind speed 14 m/s
Cut-off wind speed 20 m/s
Survival wind speed 52.5 m/s
ROTOR
Type 3 Blades, Upwind / Horizontal axis
Diameter 82 m
Rotational speed at rated power 15.6 to 18.4 rpm
Rotor blade material Epoxy bonded fiber glass
Swept area 5281 m2
Power regulation Active pitch regulated with Suzlon Flexi Slip System
GEARBOX
Type 1 planetary stage / 2 helical stages
Ratio 1 : 95.09
Nominal load 1650 kW
Type of cooling Forced oil cooling lubrication system
GENERATOR
Type Single speed induction generator with slip rings, variable rotor resistance via Suzlon Flexi slip system
Speed at rated power 1511 rpm
Rated power 1500 kW
Rated voltage 690 V AC (phase to phase)
Frequency 50 Hz
Insulation Class H
Enclosure IP 54 / IP 23 (slip ring unit)
Cooling system Air cooled
TOWER
Type Tubular tower (corrision proof painting on inner and outer surface) with welded steel plates
Tower height 76 m
Hub height (including foundation) Aproximately 78.5 m
BRAKING SYSTEM
Aerodynamic braking 3 Independent systems with blade pitching
Mechanical braking Hydraulic fail safe disk brake system
YAW SYSTEM
Type Active electrical yaw motor
Bearing Polyamide Slide bearing with gear ring & automatic greasing system
Protection Cable twist sensor, proximity sensor
PITCH SYSTEM
Type 3 independent blade pitch control with battery backup for each blade
Operating range -5 º to +90 º
Resolution 0.1 to 10 Deg
CONTROLLER Suzlon Control System with following salient features:
- Park slave
- Power output control / limitation
- Reactive power control
- Grid measurement
- Low voltage ride through (LVRT)
- Weather measurement
- Time synchronization
- Statistics
Wind Class III a
Certification & Standards GL (T-GL-009A-2007)
Quality System ISO 9001:2000
S82-1.5
World’s 5th largest and fastest growing integrated wind turbine manufacturer | 600 kW to 2.1 MW capacity wind turbines | Workforce of 14,000 people and a global presence in
21 countries across 5 continents | Manufacturing units in 3 continents | R&D facilities in Germany and The Netherlands
S82-1.5 MW is designed for generating the optimal power
output even at sites with a modest wind speed regime. The
wind turbine concept is based on robust design with pitch
regulated blade operation, a 3-stage gearbox with 1650 kW
rating and flexible coupling to the asynchronous induction
generator. The Suzlon Flexi-slip System provides efficient
control of the load and power control. The turbine operation
is efficiently controlled by the Suzlon controller. These
technologies are all well-known in the wind power industry
and have proven themselves. The S82-1.5 MW is designed to
withstand extreme conditions and operate effectively with low
maintenance cost.
BLADES
As all other Suzlon blades, the AE40 blade is a fully integrated
design. The blade manufacturing system from mould
engineering to state-of-the-art Resin Infusion Moulding (RIM) is
done in close co-operation between the Dutch design team
and the manufac-turing plants in India and China.
PITCH SYSTEM
The full-span blade pitching system is based on electrical
motors with individual power backup which allows fast and
efficient pitching of the blades. With a resolution of 0.1° and a
special fast-pitching mode, the S82-1.5 MW allows optimal
power output as well as fast and safe braking of the rotor.
GEARBOX
The design of the gearbox has always been given special
attentionin Suzlon. The design philosophy is based on years of
experience with wind turbines in harsh environments and the
internal design standard well exceeds the industry standards.
The power rating of the gearbox for the S82-1.5 MW is
actually 1.65 MW. With the recent acquisition of Hansen
Transmission, Suzlon will also in the future secure in-house
design and development of superior gearbox technology for
the customer ’s benefit.
SERVICE AND MAINTENANCE
Suzlon has teams of trained wind farm technicians around the
globe who focus on excellence in service, maintenance and
monitoring. Our service technicians aim to maximise energy
production from the wind, and ensure the turbines operate
reliably and with minimal maintenance costs during their life
span. The key emphasis is on maximizing availability and
efficiency in operation thus providing ease of mind for our
clients. Suzlon provides intensive and continuous training
programs for its wind farm technicians, both in and out of field
and complement our own training resources by using highly
respected and reputable industry training consultants to tutor
and train our technicians and technical support engineers.
MANUFACTURING
Suzlon's manufacturing facilities for wind turbine generator
components and rotor blades are currently located in India,
China, Belgium and the USA. As part of Suzlon's strategic
growth plans to significantly increase manufacturing capacity of
all key turbine components, a number of new facilities are
currently planned or under construction. This meets our
objective to vertically integrate the entire supply chain,
ensuring that Suzlon brings to the market the most cost
efficient and reliable technology. It also enables us to control
the supply chain to secure quality, volume and growth, as well
as deliver long term service support.
END TO END SOLUTIONS SINCE 1995
The End-to-End solution pattern is built on Suzlon’s expertise
in technology, processes and thorough understanding of the
wind energy market. It is a unique combination of proven
technology and a bundle of value added services. Under this
successful and proven business model, Suzlon undertakes the
complete turn-key responsibility - from arranging land; to
equipment supply & EPC; to nodal agency clearances; to
life-cycle operations & maintenance of projects. Customers
therefore do not have to engage extra manpower for their
wind projects. Suzlon brought about a paradigm shift in the
wind energy market with the End-to-End solutions. It made
setting up wind energy projects simple, hassle-free and
enabled hundreds of customers including small/medium/big
enterprises, Indian and multinational corporates, public sector
companies and even individuals set-up their own wind energy
projects with confidence and ease.
Under given set of parameter and conditions.
Subject to change without notice due to difference in parameters, conditions and/or change in equipment or technological requirements.42 cm x 29.7 cm (Non-Bleed)
42.6 cm x 30.3 cm (Bleed)
3
1600
1400
1200
1000
800
600
400
200
4 5 6 7 8 9 10 11 12 13 14 15 16 17
Wind Speed (m/s)
S82-1.5 MW
Power curve
Power (kW)
18 19 20
MODEL S82-1500kW
OPERATING DATA
Rated power 1500 kW
Cut-in wind speed 4 m/s
Rated wind speed 14 m/s
Cut-off wind speed 20 m/s
Survival wind speed 52.5 m/s
ROTOR
Type 3 Blades, Upwind / Horizontal axis
Diameter 82 m
Rotational speed at rated power 15.6 to 18.4 rpm
Rotor blade material Epoxy bonded fiber glass
Swept area 5281 m2
Power regulation Active pitch regulated with Suzlon Flexi Slip System
GEARBOX
Type 1 planetary stage / 2 helical stages
Ratio 1 : 95.09
Nominal load 1650 kW
Type of cooling Forced oil cooling lubrication system
GENERATOR
Type Single speed induction generator with slip rings, variable rotor resistance via Suzlon Flexi slip system
Speed at rated power 1511 rpm
Rated power 1500 kW
Rated voltage 690 V AC (phase to phase)
Frequency 50 Hz
Insulation Class H
Enclosure IP 54 / IP 23 (slip ring unit)
Cooling system Air cooled
TOWER
Type Tubular tower (corrision proof painting on inner and outer surface) with welded steel plates
Tower height 76 m
Hub height (including foundation) Aproximately 78.5 m
BRAKING SYSTEM
Aerodynamic braking 3 Independent systems with blade pitching
Mechanical braking Hydraulic fail safe disk brake system
YAW SYSTEM
Type Active electrical yaw motor
Bearing Polyamide Slide bearing with gear ring & automatic greasing system
Protection Cable twist sensor, proximity sensor
PITCH SYSTEM
Type 3 independent blade pitch control with battery backup for each blade
Operating range -5 º to +90 º
Resolution 0.1 to 10 Deg
CONTROLLER Suzlon Control System with following salient features:
- Park slave
- Power output control / limitation
- Reactive power control
- Grid measurement
- Low voltage ride through (LVRT)
- Weather measurement
- Time synchronization
- Statistics
Wind Class III a
Certification & Standards GL (T-GL-009A-2007)
Quality System ISO 9001:2000
S82-1.5
World’s 5th largest and fastest growing integrated wind turbine manufacturer | 600 kW to 2.1 MW capacity wind turbines | Workforce of 14,000 people and a global presence in
21 countries across 5 continents | Manufacturing units in 3 continents | R&D facilities in Germany and The Netherlands
S82-1.5 MW is designed for generating the optimal power
output even at sites with a modest wind speed regime. The
wind turbine concept is based on robust design with pitch
regulated blade operation, a 3-stage gearbox with 1650 kW
rating and flexible coupling to the asynchronous induction
generator. The Suzlon Flexi-slip System provides efficient
control of the load and power control. The turbine operation
is efficiently controlled by the Suzlon controller. These
technologies are all well-known in the wind power industry
and have proven themselves. The S82-1.5 MW is designed to
withstand extreme conditions and operate effectively with low
maintenance cost.
BLADES
As all other Suzlon blades, the AE40 blade is a fully integrated
design. The blade manufacturing system from mould
engineering to state-of-the-art Resin Infusion Moulding (RIM) is
done in close co-operation between the Dutch design team
and the manufac-turing plants in India and China.
PITCH SYSTEM
The full-span blade pitching system is based on electrical
motors with individual power backup which allows fast and
efficient pitching of the blades. With a resolution of 0.1° and a
special fast-pitching mode, the S82-1.5 MW allows optimal
power output as well as fast and safe braking of the rotor.
GEARBOX
The design of the gearbox has always been given special
attentionin Suzlon. The design philosophy is based on years of
experience with wind turbines in harsh environments and the
internal design standard well exceeds the industry standards.
The power rating of the gearbox for the S82-1.5 MW is
actually 1.65 MW. With the recent acquisition of Hansen
Transmission, Suzlon will also in the future secure in-house
design and development of superior gearbox technology for
the customer ’s benefit.
SERVICE AND MAINTENANCE
Suzlon has teams of trained wind farm technicians around the
globe who focus on excellence in service, maintenance and
monitoring. Our service technicians aim to maximise energy
production from the wind, and ensure the turbines operate
reliably and with minimal maintenance costs during their life
span. The key emphasis is on maximizing availability and
efficiency in operation thus providing ease of mind for our
clients. Suzlon provides intensive and continuous training
programs for its wind farm technicians, both in and out of field
and complement our own training resources by using highly
respected and reputable industry training consultants to tutor
and train our technicians and technical support engineers.
MANUFACTURING
Suzlon's manufacturing facilities for wind turbine generator
components and rotor blades are currently located in India,
China, Belgium and the USA. As part of Suzlon's strategic
growth plans to significantly increase manufacturing capacity of
all key turbine components, a number of new facilities are
currently planned or under construction. This meets our
objective to vertically integrate the entire supply chain,
ensuring that Suzlon brings to the market the most cost
efficient and reliable technology. It also enables us to control
the supply chain to secure quality, volume and growth, as well
as deliver long term service support.
END TO END SOLUTIONS SINCE 1995
The End-to-End solution pattern is built on Suzlon’s expertise
in technology, processes and thorough understanding of the
wind energy market. It is a unique combination of proven
technology and a bundle of value added services. Under this
successful and proven business model, Suzlon undertakes the
complete turn-key responsibility - from arranging land; to
equipment supply & EPC; to nodal agency clearances; to
life-cycle operations & maintenance of projects. Customers
therefore do not have to engage extra manpower for their
wind projects. Suzlon brought about a paradigm shift in the
wind energy market with the End-to-End solutions. It made
setting up wind energy projects simple, hassle-free and
enabled hundreds of customers including small/medium/big
enterprises, Indian and multinational corporates, public sector
companies and even individuals set-up their own wind energy
projects with confidence and ease.
Under given set of parameter and conditions.
Subject to change without notice due to difference in parameters, conditions and/or change in equipment or technological requirements.